The large-screen splicing screen has uniform brightness, and the image is stable and does not flicker: Since each point of the LCD screen maintains that color and brightness after receiving the signal, it is a digital point-to-point display, so there is no problem like CRT scanning display. Such as image flickering. Supports multi-screen image splicing, the screen can be displayed on the whole screen or split screen, and supports virtual screens.

The splicing screen installation process is a complicated process. The good use of the entire LCD splicing wall benefits from a good installation method. Only professional steps and professional personnel can ensure the perfect progress of the project. Attention to the details of the wiring during the installation of the LCD splicing wall system requires the installer not only to have professional skills, but also to be careful. The front of the LCD splicing wall is bright and clear, but the back is covered with different types of wires. The normal operation of an LCD splicing wall will involve computers, networks, image monitoring, integrated wiring, and many peripheral devices. These devices require a lot of wires behind the splicing wall. The arrangement of these wires will directly determine the playback effect of the LCD splicing wall.

1. Under normal circumstances, the survey before wiring, the construction personnel need to personally go to the site to understand and survey.

2. It is necessary to communicate with customers in detail, and make a good project wiring plan, because these determine the length of the project cycle, cost control and the presentation of the final effect to a large extent.

3. Analysis is required after the survey. Usually, the power line and the signal line must be separated to avoid unnecessary interference to the signal.

4. In addition, according to the specifications of the LCD splicing wall, the location of the cabinet, the position, etc., the length of the required various cables, the number of connectors, and the name of the signal cable should be calculated.

5. Also confirm with the customer whether the pipeline channels available for the project meet the actual needs, so as to continue the follow-up work. After analysis and planning, wiring can be carried out.

6. When wiring the specific operation, you need to see the name of the wire to ensure that the corresponding socket is inserted correctly.

7. When arranging the cable, you must be careful and smooth all the cables, and be gentle. After wiring the wire, put the corresponding wire into the wire slot.

8. After finishing all the wiring trough layout, check it again, and then you can start the machine after confirmation.